A garage rings or sends a WhatsApp: "Front pads for 162-D-12345." Most of the time the reg is enough. Some of the time it isn't, and that is where the wrong part goes out in the van, comes back the next day, and costs the factor a second run and a bit of goodwill. This guide sets out what each identifier actually tells the counter, what to ask for when the reg is not enough, and how an AI parts desk can take the first pass without guessing.
What a reg tells you, and what it doesn't
An Irish reg gives the year and, for cars registered since 1 January 2013, the half year: 161 means first registered between January and June 2016, 162 between July and December. The county comes next, then a sequence number. Revenue sets this format.
A reg lookup through a vehicle data service usually returns the make, model, engine size, fuel type and first registration date. From there the factor's catalogue or TecDoc narrows the list of parts. For common service parts on common cars, that is often enough.
Three things catch the counter out:
- Imported cars. A used import is registered with the year it was first registered anywhere, so a car first registered in the UK in 2011 gets an 11 reg here. The plate does not tell you the car came in second hand, or which market spec it was built to.
- Changes mid model. Makers change brakes, filters and suspension parts partway through a model's life. Two cars with the same model, engine and year can take different parts.
- Options and trim. Larger brakes on a sport trim, a different alternator with air conditioning, or a towing pack can all change the part.
What a VIN adds
The VIN (vehicle identification number) is the 17 character number that identifies one specific car as built. Garages find it at the base of the windscreen, on a door pillar, or on the vehicle registration certificate.
The VIN is what settles the cases above. TecAlliance added a VIN search to the TecDoc catalogue for exactly this reason: one example it gave was a model where cars up to one chassis number take one part and cars after it take another. A reg lookup alone cannot see that split.
The practical rule for the counter: the reg is the first question, the VIN is the second question when the catalogue shows more than one fitting part.
Part numbers, engine codes and photos
Sometimes the garage has the old part in hand, and that is often better than any lookup.
- A part number or manufacturer reference off the old part can be cross-referenced to the factor's own codes and to equivalent brands in TecDoc.
- An engine code, stamped on the block or on a sticker, settles which of several engines a car has when the reg data is vague.
- A photo of the part, its label or the number plate is useful, but only as good as the photo. A clear shot of a label with a readable number is strong evidence. A photo of a dirty caliper on its own is a clue, not an answer.
What to ask a garage, in order
- The reg, and the part they want.
- If more than one part fits: the VIN.
- If the car is an import or the catalogue is still unclear: the engine code, or the number off the old part.
- If they have the old part in hand: a photo of any label or number on it.
- If it is still not certain: a partsman rings the garage. Nothing goes out on a guess.
Asking for the VIN up front on every order slows the counter down. Asking for it only when the catalogue shows a split keeps orders moving and still catches the cases that go wrong.
How an AI parts desk handles this
An AI parts desk follows the same order a good partsman does. When a garage sends a reg and a request, it looks up the vehicle and the fitting parts in the factor's catalogue or TecDoc. If one part fits and it is in stock, it drafts the order on that garage's account at their price. If more than one fits, it asks the garage for the VIN or a photo of the old part's label, in the same WhatsApp thread, before drafting anything.
Every draft lands in one approval inbox showing the garage's original message, the vehicle it identified, the parts it chose and why, and anything it was unsure about. A partsman approves, edits or rejects it. Safety critical lines such as brakes and steering always go to a partsman. Where the vehicle is unclear, the order goes to the counter with a note, never a guess.
The same flow works for phone orders: the call is transcribed and drafted in the same queue. Our WhatsApp orders guide covers the WhatsApp side in more detail.
What it needs underneath
This only works if the AI reads the factor's own data, not a generic catalogue:
- Stock by branch and garage account pricing from the factor's trade system, which for most Irish factors is MAM Autopart.
- Fitment data from TecDoc, where the factor has TecDoc access. Our TecDoc guide explains how that data is licensed and used.
- A reg and VIN lookup service the factor is entitled to use.
The same lookups can sit behind a garage trade portal, so a garage typing a reg on the portal gets the same answer the counter would give. See motor factor systems for how the portal, the parts desk and the accounting agents fit together.
Frequently asked questions
Related: WhatsApp orders for motor factors, TecDoc in Ireland and motor factor systems in Ireland.
Sources
Jack Doherty
Founder and CVO, WDI
Jack founded WDI, which builds and runs email and LinkedIn outreach for Irish B2B and construction companies.
LinkedIn_1767552465140-DF70JoAZ.jpeg)